软管泵用途非常广泛，市面上的诸多场合均可适用，如：污水泵井事故清空，污水泵站事故抽空，水厂的污水池、污泥池清空。市政下水道系统的污水、污泥清空抽排。工厂、罐车事故后的油品、液体物质、化学污泥等的紧急转移；事故后地表冲洗水抽吸泵。消防应急水转移；紧急供水泵站，泵内部过流部件都可配备不锈钢，数台泵车串联使用可作为临时供水泵站。军队、海军部队战备后勤泵车。

Hose pumps are very versatile and can be applied to many occasions on the market, such as: emptying of sewage pump wells, emptying of sewage pumping stations, emptying of sewage ponds and sludge ponds in water plants. Empty sewage and sludge from municipal sewer system. Emergency transfer of oil, liquid substances, chemical sludge, etc. after the accident at factories and tankers; suction pumps for flushing water on the surface after the accident. Fire emergency water transfer; emergency water supply pump station, the internal flow parts of the pump can be equipped with stainless steel, several pump trucks in series can be used as temporary water supply pump station. Military and naval forces combat readiness logistic pump truck.

 

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

BW软管泵的基本结构之液力端<br />
液力端油泵头体、缸套、活塞、活塞杆吸入阀和排出阀等组成，它的作用是通过活塞在缸套中作往复运动形成液缸容腔变化，完成能量转化，实现吸入和排出液体。<br />
此泵曲轴箱由两极齿轮变速机构和曲柄连杆机构组成。曲轴箱的输入轴和输出轴通过牙钳联轴器对接传动。当曲轴箱的输入轴上的双联变速齿轮分别和曲轴上的对应齿轮相啮合，曲轴可得到快慢两级转速。加上变速箱的四级变速。曲轴上总共可获得8级转速，实现8级变速。液力端属于直通式结构，便于制造，装配精度高.